Silver Braze 56Ni2
SILVER BRAZE 56Ni2 TECHNICAL DATA
Silver Braze 56Ni2 is a zinc free brazing alloy commonly used in flux free brazing of stainless steels in dry hydrogen atmosphere. Silver Braze 56Ni2 shows advantages in flux free furnace brazing applications where zinc voltilzation is objectionable.
Silver Braze 56Ni2 is an intermediate temperature silver brazing alloy. Silver Braze 56Ni2 has a rather long melting range (220F/125C) so that it will tend to liquate (separate high from low melting phases) if it is heated slowly through its melting range. However, the long melting range is useful when wide gap joints are brazed as it will bridge the gap and produce larger fillets than alloys with short melting ranges that are more fluid. Silver Braze 56Ni2 cna be brazed by both torch and induction as well as under a protective atmosphere.
PROPERTIES OF BRAZED JOINTS
The properties of a brazed joint are dependent upon numerous factors including base metal properties, joint design, metallurgical interaction between the base metal and filler metal.
Silver Braze 56Ni2 conforms to American Welding Society (AWS) A5.8/A5.8M BAg-13a, Society of Automotive Engineers (SAE) AMS 4765
Silver Braze 56Ni2 is available in wire, strip, engineered preforms, specialty preforms per customer specification, powder and paste.
- AMS: 4765
- AWS: BAg-13a
- JM: Argobraze 562
- Lucas: Silvaloy 559
- Morgan/Wesgo: Nicusil 8
- PI: Silver Braze 56Ni2
- UNS: P07560
- Brazing Temperature Range High: 1740 F / 949 C
- Brazing Temperature Range Low: 1690 F / 921 C
- Liquidus: 1640 F / 893 C
- Solidus: 1420 F / 771 C
- Ag: 56%
- Cu: 42%
- Ni: 2%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.