Silver Braze 25
SILVER BRAZE 25 TECHNICAL DATA
Silver Braze 25 is recommended for brazing joining tungsten carbide to steel and stainless steel.
Silver Braze 25 is a low silver, cadmium-free brazing iller metal, which exhibits excellent flow and wetting characteristics on tungsten carbide, steel and stainless steel. The effective melting range of 1400F (750C) - 1475F (800C) makes this material free flowing and most effective with narrow gap joints..
PROPERTIES OF BRAZED JOINTS
The properties of a brazed joint are dependent upon numerous factors. These factors include base metal properties, joint design and metallurgical interaction between the base metal and the filler metal. Silver Braze 25 lap joints, in the listed metals below, have been tested at room temperature and exhibited the following results:
|Shear Strength (lbs/in2)|
|Tunsten Carbide/SAE 8740 (heat treated)||24,000 - 26,000|
|Tungsten Carbide/SAE 4340||28,500|
Silver Braze 25 conforms to American Welding Society (AWS) A5.8/A5.8M BAg-26
Silver Braze 25 is available in wire, strip, engineered preforms, specialty preforms per customer specification, powder and paste.
- AWS: BAg-26
- Lucas: Silvaloy 252
- PI: Silver Braze 25
- UNS: P07251
- Brazing Temperature Range High: 1575 F / 857 C
- Brazing Temperature Range Low: 1525 F / 829 C
- Liquidus: 1475 F / 802 C
- Solidus: 1305 F / 707 C
- Cu: 38%
- Zn: 33%
- Ag: 25%
- Ni: 2%
- Mn: 2%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.