Shop our platinum and platinum-iridium marker band inventory online at
View AS9100 Cert | View ISO 13485:2019 (Limited Scope) Cert

Gold Braze 8218™

Gold Braze 8218™ Technical Data


GB8218 can be used on any of the common ferrous, non-ferrous, and super alloys. Typical applications include brazing of electron tubes, vacuum tubes, wave guides in electronic industry. In aerospace industry, AMS 4787 can be used in brazing of fuel line assemblies and aero-engine components.

Brazing Characteristics

GB8218 wets a wide range of high temperature iron & nickel base alloys such as the stainless steels, A286, Inconel & Inconel X very well. It does not alloy excessively with these materials nor produce the severe intergranular penetration normally associated with the nickel based brazing alloys containing boron. A minimum brazing temperature of 1800°F (980°C) is suggested for furnace brazing in hydrogen or dissociated ammonia having a -40°F dew point or drier on 300 & 400 series stainless steels which do not contain additions of Ti or Al. Stainless steels of the 17-7 PH variety require dew points of -70°F or drier for furnace brazing. Brazing is also being conducted in inert atmospheres or in vacuum. Joint clearances of 0.0015” = 0.003” are normally suggested. Gold & nickel are completely soluble in all proportions at temperatures above 1490°F (810°C) & this specific composition (82Au/18Ni) represents the minimum in this system so that the solidus (melting point) & the liquidus (flow point) are identical. Normally, GB8218 would not be used for joining copper based & silver-based alloys. In addition, to having a flow point very close to the melting point of silver, & above that of the silver-copper eutectic, it would alloy quite readily with copper based alloys.


GB8218 conforms to the following specification: AMS 4787, PWA 698, Unified Numbering System (UNS) P00827 and American Welding Society (AWS) A5.8 BAu-4/BVAu-4.

Available Forms

Wire, strip, engineered preforms, specialty preforms per customer specification, powder and paste.

Compare With

  • AMS: 4787
  • AWS: BAu-4
  • JM: Orobraze 950
  • Lucas: Premabraze 131
  • Morgan/Wesgo: Nioro
  • PI: Gold Braze 8218
  • UNS: P00820


  • Brazing Temperature Range High: 1840 F / 1004 C
  • Brazing Temperature Range Low: 1790 F / 977 C
  • Liquidus: 1740 F / 949 C
  • Solidus: 1740 F / 949 C



  • Au: 82%
  • Ni: 18%

The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.

Request a Quote Now!