Gold Braze 8116™
GOLD BRAZE 8116 TECHNICAL DATA
USES
Gold Braze 8116 can be used on any of the common nickel, molybdenum and iron base heat resistant alloys. Because of its low penetration of the base metal, it is well suited for brazing of thin sections, such as thin-wall tubing or electronic vacuum devices. Gold Braze 8116 is readily used in brazing of nickel-cobalt-iron alloys and metallized ceramics.
BRAZING CHARACTERISTICS
Gold Braze 8116 is a modified gold-copper alloy. The addition of nickel renders this alloy somewhat more sluggish in flow characteristics but improves wettability on ferrous alloys. Gold Braze 8116 is generally used in reducing, vacuum or inert atmosphere. It is a more ductile, low vapor pressure alloy than standard gold-copper alloys. The composition of the alloy allows for use in applications where braze filler metals low in volatile constituents are required.
PROPERTIES OF BRAZED JOINTS
The properties of a brazed joint are dependent upon numerous factors including base metal properties, joint design and brazing technique. For controlled atmosphere brazing or vacuum brazing the recommended radial joint clearance for gold base alloys fall within 0.000in – 0.002in (0.00mm-0.05mm) range.
SPECIFICATIONS
N/A
AVAILABLE FORMS
Wire, strip, engineered preforms and specialty preforms per customer specification, powder and paste.
DISCLAIMER
The information and recommendations contained in this publication have been provided
without charge & compiled from sources believed to be reliable and to represent the best
information available on the subject at the time of issue. No warranty, guarantee, or
representation is made by the Prince and Izant Company, Inc. as to the absolute
correctness or sufficiency of any representation contained in this and other publications;
Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor
can it be assumed that all acceptable safety measures are contained in this (and other
publications, or that other or additional measures may not be required under particular or
exceptional conditions or circumstances.
Compare With
- Lucas: Premabraze 409
- Morgan/Wesgo: Nicoro-80
- PI: Gold Braze 8116
Specifications
- Brazing Temperature Range High: 1797 F / 981 C
- Brazing Temperature Range Low: 1747 F / 953 C
- Liquidus: 1697 F / 925 C
- Solidus: 1670 F / 910 C
Composition
- Au: 81.5%
- Cu: 16.5%
- Ni: 2%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.