CDA 110
CDA 110 Technical Data
Uses
CDA 110 is a fluid filler metal used for brazing of ferrous and nickel based alloys in particular steel, stainless steel and copper-nickel alloys. This alloy is typically used in furnace braze applications without the use of flux.
Brazing Characteristics
CDA 110 is a free flowing filler metal that exhibits good wetting characteristics on ferrous and nickel based materials. Maximum strength and joint integrity are obtained where joint clearance falls within the range of 0.000in – 0.001in (0.000-0.025mm) per side.
Properties of Brazed Joints
The properties of a brazed joint are dependent upon numerous factors including base metal properties, joint design, metallurgical interaction between the base metal and the filler metal.
Specifications
CDA 110 alloy conforms to: American Welding Society (AWS) A5.8/A5.8M BCu-1b, Unified Numbering System (UNS) C11000, Society of Automotive Engineers (SAE)/ AMS 4500 (chemistry only)
Available Forms
Wire, strip, engineered preforms, specialty preforms per customer specification, powder and paste
Compare With
- AWS: BCu-1b
- EN: CU 101
- Lucas: CDA 110
- PI: CDA 110
- UNS: C11000
Specifications
- Brazing Temperature Range High: 2081 F / 1138 C
- Brazing Temperature Range Low: 1981 F / 1083 C
- Liquidus: 1981 F / 1083 C
- Solidus: 1981 F / 1083 C
Composition
- Cu: 99.9%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.
