View AS9100 Cert

BNi-9

BNi-9 TECHNICAL DATA

USES

BNi-9 is a eutectic nickel-based brazing alloy suitable for brazing nickel, super alloys, stainless steels and other assemblies which require good joint strength at high temperatures with excellent corrosion and  xidation resistance. Some of the applications for this filler metal are highly stressed sheet metal components, jet engine parts, and assemblies used in corrosive conditions.

BRAZING CHARACTERISTICS

Due to its eutectic nature BNi-9 exhibits excellent flowability and is therefore a good choice for narrow, deep joints where tighter clearances are maintained. Tighter joint clearances along with the use of a minimal amount of braze alloy will limit potential erosion of the base components. When wetting to base metals which contain higher Al or Ti content in an inert atmosphere, nickel plating of the base metal is recommended. Dry reducing atmospheres or inert atmospheres are also recommended. When joining thinner, less ductile assemblies brazing should be conducted at the lower end of the braze range so along with fast heating and cooling cycles so as so minimize distortion.

PROPERTIES OF BRAZED JOINTS

The properties of a brazed joint are dependent upon the base metal, joint design and brazing technique. For atmospheric brazing the recommended radial joint clearance for nickel-base alloys fall within .000-.002” range for atmosphere brazing.

SPECIFICATIONS

BNi-9 conforms to: Unified Numbering System (UNS) N99612, American Welding Society (AWS) 5.8/A5.8M BNi-9, European Union standard (EN 1044) NI 109 and German Institute for Standardization (DIN-8513) L-Ni9

AVAILABLE FORMS

Powder and Paste

DISCLAIMER

The information and recommendations contained in this publication have been provided
without charge & compiled from sources believed to be reliable and to represent the best
information available on the subject at the time of issue. No warranty, guarantee, or
representation is made by the Prince and Izant Company, Inc. as to the absolute
correctness or sufficiency of any representation contained in this and other publications;
Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor
can it be assumed that all acceptable safety measures are contained in this (and other
publications, or that other or additional measures may not be required under particular or
exceptional conditions or circumstances.

Compare With

  • AWS: BNi-9

Specifications

  • Brazing Temperature Range High: 2030 F / 1110 C
  • Brazing Temperature Range Low: 1980 F / 1082 C

Composition

 

  • Ni: 79.9%
  • Cr: 15%
  • B: 3.6%
  • Fe: 1.5%

The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.

Gold
Silver
Platinum
Palladium