HT-080
HT-080 is primarily used in joining carbide components to steel holders as well as for brazing stainless steel.
Available Forms
Strip, engineered preforms, specialty preforms, powder and paste
Characteristics
HT-080 can be brazed by a variety of different processes including induction and atmospheric furnace brazing. It exhibits excellent gap filling capabilities and plasticity in the molten state which minimizes joint cracking tendencies that can occur with nickel silvers. It is important to ensure that the base components are properly cleaned prior to the application of the braze alloy.
Properties
HT-080 exhibits improved strength and ductility at elevated temperatures compared to other nickel silvers. This is beneficial for minimizing any distortion caused from a mismatch in thermal expansion coefficients of the base metals. *The mechanical properties listed above were determined from lap joints of tungsten carbide and SAE 8740 steel tested at ambient temperatures.
Specs
Solidus
1575 F / 855 C
Liquidus
1675 F / 915 C
Disclaimer
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this (and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances.
Resources Center
We work closely with our customers to provide guidance and support on brazing and medical precious metal related issues.