Silver Alloy 45
AWS: BAg-1
Silver Alloy 45 is a general purpose brazing filler metal. The alloy can be used successfully on nearly all nickel, iron and copper-based alloys. In certain instances, special fluxes may be required to obtain good wetting and bonding. In brazing gray cast iron it is necessary to treat the surface prior to brazing to remove graphite, in order to assure good wetting by the brazing filler metal.
Available Forms
Wire, strip, engineered preforms, specialty preforms per customer specification, powder and paste.
Characteristics
Silver Alloy 45 is a eutectic type, free-flowing filler metal that because of its narrow melting range is less sensitive to the rate of heating and should not liquate (separate into low and high melting constituents). The high fluidity makes well-fitted joints essential and prevents bridging or large fillet formation. Some base metals when brazed under high stress may crack during the brazing process when the stressed base metal is wetted by the brazing filler metal. This is a form of stress corrosion cracking. The solution is to relieve the stress before the brazing alloy is applied. A higher melting brazing filler metal may be preferred since stress relief will then occur before the filler metals.
Properties
The properties of a brazed joint are dependent upon numerous factors including base metal properties, joint design, metallurgical interaction between the base metal and the filler metal.
Specs
American Welding Society (AWS)
BAg-1
Solidus
1125 F / 607 C
Liquidus
1145 F / 618 C
Disclaimer
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this (and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances.
Resources Center
We work closely with our customers to provide guidance and support on brazing and medical precious metal related issues.